Axial Flow Pump Test Rig

Axial Flow Pump Test Rig

•    In an axial-flow pump the pumping medium flows through the impeller in the axial direction.
•    In axial-flow pumps, the pressure build-up is not achieved by the centrifugal force but like the aerodynamic principle, by the propeller blade.
•    A temperature sensor measures the water temperature.
•    The flow rate is measured with an electromagnetic flow meter.
•    They are not self-priming and the propeller must always be covered by the pumping medium.
•    Axial propeller pumps are used when high flow rates and a small head are needed.
•    The closed water circuit means that the trainer can be used independently of the water system.
•    The trainer is equipped with measuring elements for the pressures at the inlet and outlet of the pump.
•    The typical areas of application for propeller pumps are drainage systems, wastewater treatment plants and cooling water supply systems.
•    Pump Output: 1000W at 1000min-1
•    Max. Flow rate: 700L/min
•    Max. Head: 1,75m
•    Tank: 160L
•    flow rate: 0…1200L/min
•    Temperature: 0…100°C
•    Pressure (inlet): ±1bar
•    Pressure (outlet): 0…0,6bar
•    Power Supply: 230V, 50Hz, 1 phase
•    Dimension: 1110x800x1380mm
•    Weight: approx.: 154kg

Axial Flow Pump Test Rig ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.