Axial Flow Turbine test bed

Axial Flow Turbine test bed

•    Single point pivot on engine mounting enables accurate thrust measurement.
•    No need for external lubrication system.
•    No need for external battery and charger.
•    Fully tested for high performance and safety.
•    Tough, transparent polycarbonate safety screen.
•    An optional floor-standing frame is available to house the unit together with its fuel tank and electronic console.
•    The engine has been integrated into a sturdy metal frame that holds it firmly, while enabling accurate measurement of the thrust produced by the engine.
•    An electronic preprogrammed controller constantly supervises the engine, ensuring safe operating conditions at all times.
•    The engine inlet has been replaced with a custom fabricated frontal duct, to enable the air mass flow rate to be accurately measured.
•    Thrust: 200N typical
•    Mass flow: 450 g/s
•    Ignition system: Glow plug
•    Engine rpm: 105,000rpm typical
•    Engine mount: Single pivot point
•    Dimension: 880 x 510 x 1185 mm
•    Weight: 150 kg (approx)
•    Exhaust gas temperature: 800°C typical
•    Compressor type: Single-stage radial
•    Turbine type: Single-stage, low-mass axial flow

Axial Flow Turbine test bed ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.