Fluid mechanics lab equipment manufacturer, supplier and exporter from India — hydraulic benches, flow-measurement, pipe-friction, pump and turbine test rigs for engineering colleges and universities. ISO certified, AICTE/NBA aligned, turnkey supply to 40+ countries. Quote in 24–48 hours.
ALTEC manufactures and exports fluid mechanics laboratory equipment from India, serving mechanical and civil engineering colleges, polytechnics and universities across more than 40 countries. Our range covers the complete fluid mechanics and hydraulics syllabus — hydraulic benches, flow-measurement apparatus, pipe-friction and losses rigs, pump test sets and turbine apparatus — built robust for repeated student use and supplied with experiment manuals.
Fluid mechanics is a core engineering subject taught through hands-on experiments, and the laboratory apparatus must produce consistent, measurable results that let students verify theory. Our rigs are engineered for reliable operation and clear measurement, matched to AICTE, NBA and international engineering-curriculum requirements, and supplied with the instruction and experiment manuals that make them effective teaching tools.
As a direct manufacturer, with more than 10,000 products and 270 turnkey laboratory projects across over 40 countries, ALTEC offers competitive factory pricing, full export documentation, ISO certification and turnkey installation and commissioning. The fluid mechanics range follows, with guidance on equipping the laboratory.
The hydraulic bench is the foundation of the fluid mechanics laboratory, providing a controlled, recirculating water supply, volumetric measuring tank and sump on which experiment modules mount. It supplies and measures the water flow that most fluid experiments require. A single bench serves many different experiment modules in turn.
This apparatus demonstrates Bernoulli's principle by measuring pressure head along a duct of varying cross-section, letting students verify the energy equation. Manometer tubes show the pressure variation directly. A fundamental experiment in the fluid mechanics syllabus.
Pipe-friction rigs measure major losses along pipes and minor losses across bends, fittings, sudden expansions and contractions, letting students determine friction factors and loss coefficients. Manometers measure the pressure drops. A core experiment for pipe-flow analysis.
Venturi-meter, orifice-meter, rotameter and pitot-tube apparatus let students measure flow rate and determine the coefficient of discharge for each device. They compare different flow-measurement methods directly. Mounted on or supplied with the hydraulic bench.
This apparatus studies discharge through orifices and mouthpieces and determines the coefficients of discharge, velocity and contraction. The trajectory and flow are measured directly. A standard experiment in hydraulics teaching.
The impact-of-jet apparatus measures the force a fluid jet exerts on flat, inclined and hemispherical vanes, letting students verify momentum principles. The measured force is compared with theory. A fundamental momentum experiment.
The centrifugal pump test rig lets students plot the pump's characteristic curves — head, discharge, power and efficiency — across operating conditions. Instrumentation measures the relevant quantities. A core turbomachinery experiment.
The reciprocating pump test rig studies positive-displacement pump performance, discharge and slip characteristics. It contrasts with the centrifugal pump for teaching pump types. Instrumented for performance measurement.
The Pelton wheel test rig lets students determine the performance characteristics and efficiency of an impulse turbine across loads and speeds. Instrumentation measures head, flow, speed and torque. A core hydraulic-machines experiment.
Francis (reaction) and Kaplan (axial-flow) turbine test rigs extend turbine teaching to reaction machines, with performance and efficiency studies. They complete the turbine syllabus alongside the Pelton wheel. Instrumented for characteristic-curve plotting.
This apparatus determines the metacentric height and studies the stability of a floating body, linking fluid statics to naval and structural applications. Students measure the angle of tilt for known weight shifts. A standard fluid-statics experiment.
The Osborne Reynolds apparatus demonstrates laminar, transitional and turbulent flow using a dye filament in a glass tube, letting students observe and calculate the Reynolds number at transition. It makes flow regimes visible. A classic, fundamental experiment.
This apparatus determines the centre of pressure on a submerged plane surface, verifying hydrostatic-pressure theory. Students measure the moment for known water levels. A core fluid-statics experiment.
Dedicated apparatus quantifies the energy losses across pipe bends, elbows, valves and fittings, extending pipe-flow analysis to real pipework. Manometers measure each loss. Supplied as a focused experiment module.
For engineering colleges, we equip a complete fluid mechanics and hydraulics laboratory — hydraulic bench and all experiment modules — designed, supplied, installed and commissioned to AICTE/NBA requirements, with experiment manuals and training. The efficient route to a full laboratory.
The hydraulic bench is the foundation — most experiment modules mount on or draw water from it, so plan one or more benches first, then the modules. We advise on bench-to-module ratios for your class sizes.
A complete laboratory needs the core experiments — Bernoulli, flow measurement, pipe friction, impact of jet, Reynolds, pump and turbine rigs — to cover the syllabus. We map the apparatus to AICTE/NBA and international curricula.
Turbomachinery teaching needs pump rigs (centrifugal, reciprocating) and turbine rigs (Pelton, Francis, Kaplan); choose the set matched to your syllabus depth. We advise on the right selection.
Apparatus is only effective with clear experiment procedures, so specify the instruction and experiment manuals we supply with each rig. They turn the apparatus into a teaching tool.
A new fluid mechanics laboratory benefits from turnkey setup — bench, modules, installation, commissioning and training delivered together to AICTE/NBA requirements — rather than piecemeal purchasing.
A fluid mechanics laboratory needs flow-measurement, pipe-friction, pump and turbine apparatus to cover the syllabus. We map the equipment to your curriculum and lab space.
Regular shipments from India with CIF, FOB and DDP terms, full export documentation, certificates of origin and tender-compliance support.
Laboratory equipment supplier to Kenya for KNEC KCSE practicals and Ministry of Education tenders, CIF Mombasa with inland delivery to Nairobi.
Lab equipment manufacturer and exporter to Nigeria for WAEC and NECO practicals, UBEC and TETFund supply, CIF Lagos and Port Harcourt.
School and testing lab equipment supplier to Ghana for BECE, WASSCE and Ghana Education Service tenders, CIF Tema and Takoradi.
Laboratory equipment exporter to Tanzania for NECTA CSEE and ACSEE practicals and TIE programmes, CIF Dar es Salaam.
Lab equipment supplier to Uganda for UNEB UCE and UACE practicals and Ministry of Education tenders, via Mombasa corridor to Kampala.
Laboratory equipment manufacturer and exporter to Ethiopia and Rwanda for secondary and engineering colleges, via Djibouti and Dar es Salaam corridors.
School and testing lab equipment supplier to Zambia (ECZ), Malawi and Zimbabwe (ZIMSEC), CIF Dar es Salaam and Beira with inland delivery.
Laboratory equipment exporter to South Africa and the SADC region for CAPS schools, universities and testing labs, CIF Durban and Cape Town.
Lab equipment supplier and exporter to the UAE and Saudi Arabia for schools, universities and industrial testing labs, CIF Jebel Ali and Dammam.
Laboratory and testing equipment exporter to Qatar, Kuwait, Oman and Bahrain for institutional and government projects across the GCC.
Lab equipment manufacturer and supplier to Iraq, Jordan, Yemen and the wider Middle East for schools, universities and ministry tenders.
Laboratory equipment exporter to Bangladesh, Nepal and Sri Lanka for schools, engineering colleges and testing labs, CIF Chattogram and Colombo.
Lab equipment supplier and exporter to the Philippines, Vietnam, Indonesia and Southeast Asia for educational and industrial laboratories.
Laboratory equipment exporter to the Caribbean — Trinidad, Jamaica, Guyana, Barbados — for CXC CSEC and CAPE practicals and institutional tenders.
Laboratory and testing equipment manufacturer and exporter to Latin America and worldwide, for World Bank, UNDP, UNICEF and AfDB-funded programmes.
ALTEC is one of India's largest laboratory-equipment exporters, with more than 10,000 products, 500 institutional clients and 270 turnkey projects across over 40 countries. For fluid mechanics laboratories, that scale lets us supply a single test rig or design and install a complete hydraulics laboratory to AICTE/NBA and international requirements.
Because we manufacture directly, we control build quality and offer competitive pricing, complete experiment modules and the manuals that make them effective. Every order ships with full export documentation under CIF, FOB or DDP terms, with installation and commissioning for turnkey laboratories.
Our team helps colleges specify the apparatus for their curriculum and class sizes, prepares priced bills of quantity, and delivers turnkey fluid mechanics laboratories with installation, commissioning and training. For government and donor-funded engineering programmes we supply the compliance documentation and reporting required.
Procurement teams shortlist ALTEC because we are a direct fluid mechanics lab equipment factory, not a reseller. We supply engineering colleges and universities across India with the complete fluid mechanics lab equipment range, built and assembled in-house.
As a fluid mechanics lab equipment exporter, we ship to buyers across Africa, the Middle East and Southeast Asia under CIF, FOB and DDP terms with full export documentation. Because we manufacture in-house, we quote factory pricing directly — most buyers receive a full price list within 24–48 hours, whether they need a single item or a complete laboratory installed end to end.
Whether you need one unit, a bench of fluid mechanics lab equipment or a turnkey laboratory designed and commissioned end to end, ALTEC delivers as a single source — the same team that builds the equipment also prices, documents and ships your order.
ALTEC manufactures the complete fluid mechanics and hydraulics range: hydraulic benches, Bernoulli's apparatus, pipe-friction and losses rigs, flow-measurement apparatus (venturi, orifice, rotameter, pitot), orifice and mouthpiece apparatus, impact-of-jet apparatus, centrifugal and reciprocating pump test rigs, Pelton, Francis and Kaplan turbine rigs, metacentric-height, Reynolds and centre-of-pressure apparatus — for engineering colleges and universities.
Yes. We provide turnkey fluid mechanics and hydraulics laboratory setup — hydraulic bench and all experiment modules — designed, supplied, installed and commissioned to AICTE/NBA and international curriculum requirements, with experiment manuals and training.
Yes. Each fluid mechanics rig is supplied with instruction and experiment manuals giving the procedure, theory and expected results, so the apparatus is an effective teaching tool from installation.
Yes. We supply fluid mechanics laboratory equipment for engineering-college, institutional and government tenders worldwide, with priced bills of quantity, technical-compliance documentation, certificates of origin, ISO certification and CIF/FOB/DDP export terms.
The hydraulic bench is the foundation of the fluid mechanics laboratory, providing a controlled recirculating water supply, volumetric measuring tank and sump on which experiment modules mount. Most fluid experiments draw water from and return it to the bench, so it serves many modules in turn.
ALTEC exports to more than 40 countries across Africa, the Middle East, South and Southeast Asia and the Caribbean, delivering CIF to major destination ports or FOB and DDP as required, with full export documentation, installation and commissioning support.
Share your requirement, quantities & destination — our export team responds fast with line-by-line pricing and the full tender documentation pack.
ISO 9001:2015 · CE declarations · COO (Form A/GSP) · pre-shipment inspection