Water Distribution Kit 6 Taps

Water Distribution Kit 6 Taps

Water distribution kit (tap stand) to be used with collapsible water tanks.
The stand is made of hot dipped galvanized steel pipes or hot rolled galvanized steel sections.
All pipes should be threaded and must be able to withstand rough handling during use.

Supplied with:
Four sturdy legs (or two "A" frames), each leg fitted with a drilled plate for holding down purposes.
1 x 1 ½" (40 mm) male threaded riser pipe.
2 male threaded Guillemin or Storz couplings.
1 central, horizontal distribution pipe.
2 x ¾" (20 mm) female threaded caps.
7 x Female threaded ¾" (20 mm) self-closing taps.
4 rolls of teflon tape (12 mm x 12 meters each).
6 x Male threaded tap pipes welded to the central distribution pipe.
1 piece of wire netting for concrete slab, 0.9 x 1.5 meters each.
4 plated pegs for fixing down of the tap stand, each 30 cm long, minimum diameter 12 mm.
Minimum discharge rate per tap: 10 liters per minute at one meter head, operation range: Up to 4 bars.
1 Female threaded 2"-1 ½" (50 mm-40 mm) junction tee with closing(for the connection to the storage tank or to other tap stands).

Water Distribution Kit 6 Taps ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.