ALABS-A104-293
Categories: Technical Educational Equipment
Solid Liquid Extraction Unit
- Demonstration of batch and continuous multiple stage liquid/solid extraction processes.
- Investigation into the effect of solvent temperatures and flow rates of solvent and solids.
- Mass balancing.
- Process economics.
The heart of the solid/liquid extraction system is a continuously rotating extraction cell divided into compartments. The raw material is fed into these compartments from the input hopper using a screw feeder mechanism. The material is then passed under three solvent sprinkler bars, one for each stage of the process, and the dissolved product captured in three drainage compartments. Pumps are provided at each stage to pump the product from the drainage compartment of one stage to the sprinkler of the next stage. At the end of the process the spent carrier material is dropped into a collection vessel, assisted by water sprayed from above.
The system is configured as a three stage, counter current flow process, but may also be configured as a one or two stage process for teaching purposes. Full temperature control is provided at each stage of the process using the three integrated PID controllers and related heating elements. Direct control is also provided over the product feed rate, the cell rotation speed and the inter-stage pump speeds.
Solvent Temperatures: Ambient to 50°C, individually controllable
Pump Rate: 0-13.5l/hr
Feed Rate: 0-3l/hr
Rotation Speed: 1 rev/15min (4revs/hr)
Cell Compartment Capacity: 0.16l
Solid Liquid Extraction Unit ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.