ALABS-A174-004
Categories: Unit Operations
Gas Absorption Column
The packed absorption column is made up of two 75mm diameter clear acrylic sections joined end to end and installed vertically on a mild steel floor standing framework. The column is filled with 10mm x 10mm glass Raschig rings, which are representative of the type of packing used in gas absorption. Liquid for the process is stored in a 50.0 litre rectangular feed tank and a centrifugal pump is used to deliver the liquid to the top of the column where it falls through the packing and returns to the tank. A variable area flow meter in the recirculation line gives a direct reading of flow rate.
The gas to be absorbed is normally carbon dioxide and would be taken from a pressure cylinder (not supplied), standing adjacent to the column. This gas passes through a calibrated variable area flow meter and is mixed with an air stream also of known flow rate from a rotary compressor positioned in the framework. The ratio of gas to air in the mixture entering the column is therefore known and is easily varied. Entering at the base of the column, the gas mixture rises up through the packed bed and is counter-currently contracted with the liquid flowing down the column.
Feed tank capacity: 50.0 litres
Internal diameter of column: 80mm
Volume of packing: 7.0 litres
Height of absorption column: 1.4m
Type of packing: Raschig rings 10x10mm
Air compressor capacity: 0.15m3/min@0.3bar
Air flow meter range: 20-180 l/min
Gas flow meter range: 1.0-22.0 l/min
Water flow meter range: 1.0-10.0 l/min
Gas Absorption Column ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.