Bitumen Ductility Test Machine
- The Machine consists of the following:
- Temperature controller (Thermostatic/Digital)
- Stainless steel scale and pointer
- Stainless steel bath
- Immersion electric heater
- Electric motor with gear mechanism
- Control Panel
- Constant speed Pump cum stirrer
- Carriage holding up to three standard briquette moulds
The Machine consists of the following.
- Temperature controller (Thermostatic/Digital)
- Stainless steel scale and pointer
- Stainless steel bath
- Immersion electric heater
- Electric motor with gear mechanism
- Control Panel
- Constant speed Pump cum stirrer
- Carriage holding up to three standard briquette moulds
Description:-
The apparatus consists of water bath with a thermostatic heater and a
circulating pump to maintain uniform water temperature. One half of the
briquette moulds is fixed in a fixed plate in the water bath, the other
half of the briquette mould is fixed to a carrier which slides over a
rotating threaded shaft with a clutch. The motor and gears to rotate the
shaft are housed in a cabinet fixed above the other end of the both. A
pointer fixed to the carrier moves over. A scale graduated from 0-110 cm
x 1mm fixed on the bath with “0” (Zero) of the scale towards the fixed
plates side. The rotating shaft has 2 speeds of travel for the bracket, 5
cm/min. and 1cm/min. selected by a clutch. Water bath inside is of
Stainless steel with insulation and a water drain. A heater with
thermostatic control is fitted. Inside the water bath. Control switches
for motor, stirrer, heater and indicator lamps are fitted to a control
panel located at a convenient place on the water bath. Complete with
three briquette moulds and one base plate. Working on 230 Volts, single
phase, 50 cycles, AC.
Bitumen Ductility Test Machine ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.