Electronic Spring Tension Machine

Electronic Spring Tension Machine

•    Automatically clearing: test force, displacement, according to the needs to be cleared at any time.
•    Automatic shifting: automatic switching the appropriate range to ensure accuracy load.
•    Description:
•    Automatic calibration: system can automatically realize the accuracy of the calibration value
•    Control method:You can achieve a variety of control method, test force, test speed, displacement, etc.
•    Setting the spring remaining height of the spring, detect the spring test force P.
•    Setting max10 detection points.
•    Can set the pre-compression height of the pre-compressed spring, the number of pre-compression can be arbitrarily set.
•    The deformation caused by the sensor and stiffness of the machine does not affect the accuracy of displacement.
•    The detection of the spring deformation is in contact with the work pressure plate shall prevail, then the test The deformation caused by the sensor can be compensated.
•    Max test force(N): 10kN, 20kN, 30kN, 50kN, 100kN, 200kN, 300kN
•    Speed error: ≤±1%
•    Test accuracy: 1 class
•    Structure: Four columns floor type
•    Control method: automatic control
•    Test force value relative error: ≤±1%
•    Displacement value relative error: ≤±1%
•    Power supply: AC220V±10%,50Hz
•    Speed adjust range: 0.05-300mm/min     
•    Effective tensile space: 800    
•    Effective compression space: 700
•    Pressure plate size: 400, 500, 550
•    Pressure plate diameter: 110mm
•    Displacement resolution: 0.01mm
•    Deformation value relative error: ≤±(50+0.15L)um

Electronic Spring Tension Machine ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.