ALABS-A19-149
Categories: Civil Engineering Instruments
Sieve Shaker (Gyratory)
This sieve shaker is designed to carry up to 7 sieves of 6 inch or 8
inch diameter. The 12 inch dia.sieves can be used with the help of
Adaptor. A 1/4 HP. motor through a reduction gear immersed in oil drives
the shaker. The sieve table dies not rotate but is inclined from the
vertical axis and the direction of inclination changes progressively in
clockwise direction. If the stop-pin below the table is removed. the
shaker can have a rotary motion. In addition to this gyratory motion of
the table, there is an upward and downward movement ensuring that each
square cm of the sieve is utilized. A pair of rods and a holder is
supplied. The holder can be fixed on the top of the upper most sieves,
and thus the sieve set is firmly held. Suitable for operation on 230
volts, 50 cycles single phase A.C. Supply.
Adaptor for 30cm dia test sieves can be fitted in above.
Sieve Shaker (Gyratory) ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.