Separating and Throttling Calorimeter With Mini Boiler Test Bench

Separating and Throttling Calorimeter With Mini Boiler Test Bench

•    It is defined by the ratio of mass of vapour and total mass.
•    The total mass is calculated from the sum of fluid mass and vapour mass.
•    Separating and throttling calorimeters are used to determine the vapour content.
•    Sensors measure the pressure and temperature before and after depressurization.
•    The measuring results can be used to determine the vapour content with the h-s diagram.
•    A downstream throttling calorimeter is used to determine vapour contents between x=0,95 and x=1. The wet vapour is depressurized in this process.
•    The remaining vapour part is depressurized and then liquefied in a water-cooled condenser and also collected in a measuring cup.
•    In practice, devices to determine the vapour content are used in steam power plants, downstream of steam turbines or at steam boilers upstream of the super heater.
•    The two quantities can be used to determine vapour mass and total mass to calculate the vapour content.
•    If the vapour content is x=0, the evaporation medium is completely liquid, x=1 means dry saturated vapour, a value in between means wet vapour with a variable liquid content.
•    Temperature: 240°C
•    Pressure: 10bar
•    Safety valve: 10bar
•    Temperature: 0…400°C
•    Pressure (inlet): 0…16bar
•    Pressure (outlet): -150…100mbar
•    Dimensions: 800x 800 x 1700 mm
•    Weight (approx.): 110 KG
•    230V, 50Hz, 1 phase
•    230V, 60Hz, 1 phase
•    120V, 60Hz, 1 phase

Separating and Throttling Calorimeter With Mini Boiler Test Bench ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.