Pump Centrifugal Diesel

Pump Centrifugal Diesel

Self-priming centrifugal pumping set, capacity 20 Cubic Meters per hour at around 2900 RPM, at 20 meter TMH for 1-m suction head.
Maximum suction lift 5 metros.
The skid has pre-drilled holes to facilitate bolting it to a foundation.
An air-cooled, direct injection, diesel engine powers this pump.
The pump is coupled directly to a diesel engine of matching power requirement.
The pump casing, shaft and impeller are made from cast iron, and the water seal on the shaft is mechanical.
The supplier will also provide the most efficient diameter of inlet/outlet pipes/hoses with the pump.
The hoses are supplied with matching bayonet type couplings to match the pump inlet/outlets.
The suction inlet and discharge outlet will be the most efficient standard diameters established by manufacturer depending on the pumping capacity of the pump.
The engine is fitted with a speed control governor, a fuel tank with sufficient capacity for (2 - 3) hours of continuous normal operation.
The engine is also fitted with a sound proof muffler and the liners are re-borable.

Pump Centrifugal Diesel ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.