Neonatal Warming System
The Warmer is used to assist premature babies maintaining the appropriate body temperature.
System consists of a control unit, a heating pad, a water mattress and an inflatable Baby Nest frame.
Electronic servo temperature control.
Automatic warm-up to 37°C, time to stabilize approx. 20 min.
Large color display shows operational status, with set and measured values.
Integrity testing of all system parameters every 5 minutes.
Flexible waterproof low voltage heating pad slides under mattress.
Pre-set is 37°C, Adjustable from 35 to 38°C in increments of 0,1°C.
Accuracy temperature control of heating pad is ±0.1°C.
Reusable Baby Nest frame keeps baby in place.
External battery connection point at the underside of the control unit.
Strong soft plastic Baby Nest mattress fills with water (about 36°C), approx. 4.5 L.
Over Temperature Alarm: at a water temperature of 39.5 ±1 °C. Warming capacity: About 4-5°C per hour.
Cotton cover frame can be tightly secured around the water mattress and heating pad.
The water mattress will cool 1°C per hour which means that one has about 2 hours to restore power.
Perform self-testing of all functions and internal safety circuit by switching the control unite.
Fit with connector for standard YSI skin temperature sensor.
Control Unit:
Auditory Alarm: 55 dB sound level.
Main Power/frequency: 110-240 V AC or 110-120 AC. 50/60 Hz.
Battery power: 24 V DC, 12 V DC (with limited warming capacity)
Temperatures available: 35 to 38°C increments of 0.1°C.
Over temperature alarm at water Temperature of 39.5 ±1 °C.
Internal Battery: Alkaline, 1.5V size LR6 (AA) (only for power failure alarm.
Heating Pad:
Power requirements: 110-240 V AC or 110-120 V AC.
Frequency 50 or 60 Hz,
Battery 12 or 24 V.
Voltage: 24-volt DC from control Unit BW-50 007 when powering with mains
power or 24V DC when powering from 12-24V battery source.
Power consumption 50 Watt.
Material: PVC.
Material: Medical Grade PVC.
Baby Nest:
Material: Cover, high quality cotton and polyester.
Washing: Recommended temperature 60°C, can tolerate 90°C but might shorten lifetime.
Neonatal Warming System ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.