Microprocessor Trainer Kit

• 16K Bytes of EPROM with 8K bytes of Battery Backup RAM
• 48 I/O Lines, Three Channel Timer/Counter, PC Serial Interface
• 20×2 LCD Display with 101 ASCII Keyboard
• Power-full Command like Single Stepping, Break Point,Full Clock Execution, Examine Memory/ Register.
• Uploading & Downloading to and from PC in Windows98/XP/NT
• In-Built Power Supply

Specifications     

• CPU operating at 6.144 Mhz
• 16K bytes of Powerful Monitor Program using 27512 EPROM
•  8K bytes of RAM using 6264 with Battery Backup using NICD Battery
•  On-board one memory expansion up to 56KB
• Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC    Connector
• 48 I/O lines provided through two nos. Of 8255 brought out at 26 Pins FRC  Connector to interface with IC-XX Series
• RS-232C interface through SID/SOD lines
• Two mode of commands:
  - ASCII Key pad Mode
  - Serial Mode
•  20×2/20×4/40×2 Alphanumeric LCD Display with Backlite
•  101 ASCII Keyboard interface using operating @ 12MHz
•  Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single  stepping, Execution, Block Move, Insert Data, Delete Data can be used  through ASCII keyboard or PC serial mode
•  On board Single Line Assembler / Disassembler
•  Facility for Downloading/Uploading files from/to PC
•  All address, data & control lines are available on KXT Bus 50 pin FRC    Connector to interface with SC-XX Series
•  All ICS are mounted on IC Sockets
•  Bare board Tested Glass Epoxy SMOBC PCB is used.
•  In-Built Power Supply of +5V/1.5A, ±12V/250mA
•  Attractive Wooden enclosures of Light weight Australian Pine Wood.
•  User’s Manual with sample programs.
•  270mm x 185mm x 105mm (L x W x H)
•  Weight 3 Kgs