ALABS-A15-020
Categories: Cement Testing Equipments
Curing Compound Mould
The mould is made of stainless steel and it is water tight. The mould is
rigidly constructed to prevent distoration and it is thoroughly clean.
The interior faces of the mould is plane surface. The mould is 150mm X
300mm at the top, 143 x 295 mm at bottom, and 50 mm depth measured on
the inside. The mould is flat rim at the top on all sides approximately
6mm in width. A wooden float has a dimension of 75 mm X 280 mm X 20 mm
thick is also be provided. The packing rod to be supplied with mould is
made of non-absorptant, non-abrasive, non-brittle rubber compound
material. The packing rod is 150mm long and have cross sectional
dimensions of 25mm X 12 mm with tamping face the form of a blunt
torpedo. S.S. Mould 300 x 150 x 50 mm
Curing Compound Mould ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.