Cementometer Moisture Meter

Cementometer Moisture Meter

•    The Cementometer Microwave moisture meter uses a two prong sensor to measure the complex dielectric constant of the material in contact with the prongs.
•    This output is then converted by the integrated microprocessor and moisture content is displayed directly.
•    As the dielectric constant of water is four to eight times greater than most aggregates andcements, changes in water content directly effect the sensor output.
•    Two units are available to encompass the full range of water cement ratio’s found in wet concrete.
•    The Cementometer Type R handles normal water cement ratio’s with its two prong probe.  
•    An average of five to ten readings is normally taken in order to ensure a valid reading.
•    The range of this instrument is approximately 0.35 to 0.65water/cement.
•    The units come calibrated for standard type I, II, and III cements.
•    It can also be programmed with up to ten different mix design by the user.
•    Cementometer Type handles low water/cement ratio’s with its five prong probe.
•    The range of this instrument is approximately 0.25 to 0.5 water cements.
•     For highest accuracy, the user should program the unit for the material being used.
•    The Cementometer Type has simple to use calibration process that rapidly creates the user programs without the need for external computing devices.
•    Finally, the Cementometer can store over 150 readings.
•    Storage is complete with the time and date for future reference. Data can be recalled via USB interface to a personal computer running the Cementometer software.

Cementometer Moisture Meter ALTEC Laboratory Equipments and ALTEC Laboratory Instruments Tenders.