Testing Labs Equipments Manufacturers India Testing Labs Equipments, Testing  Laboratory Equipment, Testing  Laboratory Instruments, Testing Laboratory Supply
    Home    Altec Export    Catalog    Lab Tenders    Lab Basket    Lab Search    Contact

Stress and Strain Analysis Thick Walled Cylinder 

Altec Labs Home  »  Structural Lab Equipment ยป Stress and Strain Analysis Thick Walled Cylinder
Altec Labs Manufacturers for Stress and Strain Analysis Thick Walled Cylinder from India  
Stress and Strain Analysis Thick Walled Cylinder  Name
 
(Code - ALABS-A169-008 ) | Altec Export Lab Specification:
Stress and Strain Analysis Thick Walled Cylinder : Stress and Strain Analysis Thick Walled Cylinder 

In contrast to thin-walled vessels, when designing thick-walled vessels allowance must be made for an uneven distribution of stresses through the thickness of the wall. The stress state in a thick-walled vessel under internal pressure is triaxial. The direct stresses and strains occur: radial, circumferential, hoop and axial. Since the stresses and strains occurring in a vessel are not measured directly, they are determined by measuring strains on the surface. Strain gauges are employed to record the strains electrically and the stresses and strains are determined from those measurements. The experimental unit is used to investigate direct stresses and strains occurring on a thick-walled cylinder subjected to internal pressure. The oil-filled cylinder is made up of two halves, and is sealed on both sides. Internal pressure is generated inside the vessel with a hydraulic cylinder and a hydraulic pump. A pressure gauge indicates the internal pressure. An eccentric groove is cut between the two halves of the cylinder, in which the strain gauges are mounted at various radial points. Additional strain gauges are mounted on the inner and outer surfaces of the cylinder. Radial, hoop and axial strains are measured, enabling the strain state to be fully recorded. The measurement amplifier displays the recorded signals as measured value readouts. To assist and visualise evaluation of the experiment, the measured values can be imported into the applications software. Mohr’s Circle for stress and strain analysis is used to represent the triaxial stress state in the cylinder wall graphically. The direct stresses and strains are calculated from the measured strains, applying the appropriate equation of elasticity. The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

Specification:

1. Investigation of the stresses and strains in a thick-walled cylinder under internal pressure
2. Two-part cylinder with flat groove
3. Strain gauge application at various radial points in the groove and on the cylinder surface
4. Hydraulic cylinder with hydraulic pump to generate pressure
5. Hermetically sealed hydraulic system, maintenance-free
6. Multi-pin connector for measurement amplifier provided

Technical Data:
Aluminium cylinder

- length: 300mm
- diameter: d=140mm
- wall thickness: 50mm
- internal pressure: max. 7N/mm² (70bar)

Strain gauge application

- 11 strain gauges: half-bridges, 350Ohm
- gauge factor: 2,00 +/-1%
- supply voltage: 10V
Pressure gauge: 0…100bar, accuracy: class 1,0

 

   

Altec Lab Products India

Aggregate Testing Equipment
Analog Electronics Trainer
Bitumen Testing Equipment
Cement Testing Equipment
Civil Engineering Instruments
Digital Electronics Trainer

 

Biology Lab Equipment
Educational Motors & Machines
Educational Trainers
Fluid Mechanics Lab
Technical Educational Labs
Universal Testing Machine

 

Momentum Transfer Lab
Theory of Machine Lab
Hydraulic Machine Lab
Thermodynamics Lab
Heat Transfer Lab Equipment
Structural Lab Equipment

Company - Altec Export

About Altec Export
Altec Laboratory Products
Search - Lab Products
Send Request
Contact Us
Home
Copyright © 2014 equipmentsexporters.com | All rights reserved.  Suppliers for ALTEC Laboratory Equipments & ALTEC Laboratory Instruments