|Kaplan Turbine Test Rig :
Kaplan Turbine Test Rig
This turbine is suitable for low head.
The power produced by a turbine is proportional to QH. As the head (H)
decreases the J discharge (Q) must increase to produce the same power.
The present set-up consists of a scroll casing housing a runner. Water
enters the turbine through the stationary guide vanes and passes through
the runner axially. The runner has a hub and airfoil vanes, which are
mounted on it.
The water is fed to the turbine by means
of Centrifugal Pump. The runner is directly mounted on one end of a
central SS shaft and other end is connected to a brake arrangement. A
transparent hollow cylinder made of acrylic is fitted in between the
draft tube and the casing for observation of flow. Load is applied to
the turbine with the help of rope brake arrangement so that the
efficiency of the turbine can be calculated. The set-up is supplied with
control panel. A draft tube is fitted on the outlet of the turbine.
The set-up is complete with guide
mechanism. Pressure and Vacuum gauges are fitted at the inlet and outlet
of the turbine to measure the total supply head on the turbine
- To study the operation of Kaplan turbine.
- To determine the Output Power of Kaplan Turbine.
- To determine the turbine efficiency
- Water Supply and Drain
- Electricity 1.5 kW, 440V AC, Three Phase
- Floor Area 1.5 x 0.75 m